ĐỒNG HỒ SO ĐIỆN TỬ 543-350B 12,7MM ; 0,001MM

Liên hệ

(5,00/5) - 146 bình chọn.

Đồng hồ so điện tử 543-350B

Thông số kỹ thuật đồng hồ so 543-350B

Range:	12.7 mm
Digital step:	0,001 mm
Repeatability:	0,002 mm
Inch-Metric:	Metric
Max. Permissible Error (Total Range):	0,003 mm
Hysteresis:	0,002 mm
Type:	EN ISO Standard
Mass:	285 g
Data output:	Yes
Measuring force:	≤2,5 N N
Scale:	Capacitance type, ABSOLUTE linear encoder
Max. response speed:	Unlimited
Stem Ø:	8 mm
Contact point:	Carbide ball, thread M 2.5 x 0.45 mm
Alarm:	Counting value composition error, overflow error, tolerance limit setting error
Power supply:	5 – 24 V DC / 100mA (max)
Display:	LCD, character height 8 mm
Protection:	IP54
Max. response speed:	Unlimited
Measurement frequency (MAX/MIN/RANGE):	Standard mode: 100 times/s (plunger speed max. 0.1mm/s for peak measurement)
Delivered:	With signal cable 4 m. One end is fixed to the main unit. no connector is supplied for the other end.
Counting direction switchable:	Yes
Signal output: (+NG, OK, -NG):	Yes
Signal input: No-voltage input, (PRESET_RECALL/ZERO, HOLD_RESET):	Yes
ZERO/ABS:	Yes
GO/±NG judgement:	Yes
ON/OFF:	Yes
GO/±NG judgement via LED:	Yes
GO/±NG judgement on LCD:	Yes
MAX/MIN/RANGE:	Yes
PRESET 3x:	Yes
Analog bar resolution switchable:	Yes
Function lock:	Yes
Calculation function (with formula):	Yes
Digital/Analog:	Digital

This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output.

Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54)
Measures MAX/MIN/RANGE (run-out value).
Saves three different Preset and Tolerance settings.
Fast measurement frequency mode (detection cycle 50 times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE)
Calculation function Ax. Coefficient A freely definable, x = displacement of the plunger
Analogue bar graph in the display (12 different scales switchable)
GO/±NG tolerance judgment function