ĐỒNG HỒ SO ĐIỆN TỬ 543-300B 12,7MM ; 0,001MM

Liên hệ

(5,00/5) - 145 bình chọn.

  • Mô tả

Đồng hồ so điện tử 543-300B

Thông số kỹ thuật đồng hồ so 543-300B

Range:

12,7 mm

Digital step:

0,001 mm

Repeatability:

0,002 mm

Inch-Metric:

Metric

Max. Permissible Error (Total Range):

0,003 mm

Hysteresis:

0,002 mm

H MPE (Hysteresis):

0,002 mm

Type:

EN ISO Standard

Mass:

170 g

Data output:

Yes

Measuring force:

≤ 1,5 N

Scale:

Capacitance type, ABSOLUTE linear encoder

Max. response speed:

Unlimited

Stem Ø:

8 mm

Contact point:

Carbide ball, thread M 2.5 x 0.45 mm 

Alarm:

Low voltage, ABS composition error, overflow error, tolerance limit setting error

Power supply:

1 battery CR-2032

Battery life:

Standard mode: approx. 1 year
fast mode: approx. 4.5 month

Display:

LCD, character height: 8 mm, rotatable 330°

Protection:

IP42

Max. response speed:

Unlimited

Measurement frequency (MAX/MIN/RANGE):

Standard mode: 10 times/s
fast mode: 50 times/s
(plunger speed max. 50 µm/s for peak measurement)

Delivered:

Including 1 battery

Low voltage alarm:

Yes

Counting direction switchable:

Yes

ZERO/ABS:

Yes

GO/±NG judgement:

Yes

Digimatic data output:

Yes

ON/OFF:

Yes

Lock function:

Yes

Fast measurement mode:

yes

MAX/MIN/RANGE:

Yes

PRESET 3x:

Yes

Analog bar resolution switchable:

Yes

Function lock:

Yes

Calculation function (with formula):

Yes

Power supply report:

UN 38.3 Test Summary Report

Digital/Analog:

Digital

This indicator is the MAX/MIN/RANGE value holding function model. It offers the following benefits:

  • The MAX/MIN/RANGE (run-out value) can be measured
  • A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably
  • Easy indicator setup via a setup menu
  • Analogue bar graph in the display (12 different scales switchable)
  • GO/±NG tolerance judgement function
  • This indicator enables the use of a calculation function for the measured value Ax
  • Coefficient A is freely definable and x = displacement of the plunger
  • A USB interface box can be used to set up the indicator from PC via dedicated software

Catalogue: 543-300B

Thành viên
Thành viên Thành viên Thành viên Thành viên Thành viên