ĐỒNG HỒ SO ĐIỆN TỬ 543-595B 50,8MM ; 0,001MM

Liên hệ

(5,00/5) - 115 bình chọn.

Đồng hồ so điện tử 543-595B

Thông số kỹ thuật đồng hồ so 543-595B

Range:	50,8 mm
Repeatability:	0,002 mm
Inch-Metric:	Metric
Range:	50,8 mm mm
Max. Permissible Error (Total Range):	0,006 mm
Hysteresis:	0,002 mm
Type:	EN ISO Standard
Mass:	260 g
Data output:	Yes
Measuring force:	≤2,3 N N
Scale:	Capacitance type, ABSOLUTE linear encoder
Max. response speed:	Unlimited
Stem Ø:	8 mm
Contact point:	Carbide ball, thread M 2.5 x 0.45 mm
Alarm:	Low voltage, ABS composition error, overflow error, tolerance limit setting error
Power supply:	1 battery CR-2032
Battery life:	Standard mode: approx. 1 year fast mode: approx. 4.5 month
Digital step:	0,001 mm
Display:	LCD, character height 8 mm, rotatable 330°
Protection:	IP42
Max. response speed:	Unlimited
Measurement frequency (MAX/MIN/RANGE):	Standard mode: 10 times/s fast mode: 50 times/s (plunger speed max. 50 µm/s for peak measurement)
Delivered:	Including 1 battery
Low voltage alarm:	Yes
ZERO/ABS:	Yes
GO/±NG judgement:	Yes
Digimatic data output:	Yes
ON/OFF:	Yes
DATA (output with cable) / HOLD (display value):	Yes
MAX/MIN/RANGE:	Yes
Lock function:	Yes
Selectable resolution:	Yes
Fast measurement mode:	yes
Calculation function (with formula):	Yes
PRESET 3x:	Yes
Analog bar resolution switchable:	Yes
Function lock:	Yes
Power supply report:	UN 38.3 Test Summary Report
Digital/Analog:	Digital

This indicator allows you to use a calculation function for the measured value Ax+B+Cx^-1

The integrated calculation formula is useful in a variety of applications (e.g. roll diameter measurement)
Coefficients A,B and C are freely definable. X = displacement of the plunger
Analogue bar graph in the display (14 different scales switchable)
GO/±NG tolerance judgement function
MAX/MIN/RANGE function to measure peak values
A fast measurement frequency mode(detection cycle 20 ms or 50 times/s) is selectable to measure in the peak detection mode (MAX/MIN/RANGE) more reliably
Easy indicator setup via a setup menu
A USB interface box can be used to set up the indicator from PC via dedicated software

Catalogue: 543-595B